SS centrifugal pump, single-stage pump, mechanical seal type, toluene transfer pump
内页Banner
products
Sea water transfer pump
Stainless steel centrifugal pump

IH stainless steel horizontal centrifugal pump

-Design:Long life grease or oil bath lubrication.

-Wetting part material:SUS304/SUS316/Dual-Phase steel.

-Nominal Pressure:PN16.

-Flange type:DIN/GB/JIS 10K/ANSI B16.5.

-Temperature range:-20℃ to 180℃.

-Certificate:ISO9001 certification, CE certification.

FEATURES

  • Standard design.
  • Double-face flushing water mechanical seal capable of dealing with granular media.
  • Long service life mechanical seal,Low operating cost.
  • Deep groove ball bearing self-lubricating bearing quiet operating environment.

SPECIFICATIONS

  • Rated pressure:PN16.
  • Wetting part material:SUS304/SUS316/Dual-Phase steel.
  • Impeller type:Closed/Semi-open.
  • Flange type:DIN/GB/JIS 10K/ANSI B16.5.
  • Temperature range:-20℃ to 180℃.

RISTER PUMPS

For more details or quotations, please contact us and leave your contact information.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
chloric acid pump chloric acid pump
more
CQB-F Teflon Lining Magnetic Pump
-Applicable liquid:An acidic alkaline liquid with no impurities and strong corrosiveness -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
Caustic soda pump Caustic soda pump
more
IHF- mechanically sealed chemical centrifugal pump
-It is suitable for the transportation of corrosive liquids in various complex environments. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
Sodium hydroxide pump Sodium hydroxide pump
more
CQB-S Stainless steel magnetic drive pump
Suitable for all kinds of organic solvents transport, never demagnetization -Design:Sealed non-leakage design -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange -Temperature range:-20℃ to 240℃ -Certificate:ISO9001 certification, CE certification
Sea water transfer pump Sea water transfer pump
more
IH stainless steel horizontal centrifugal pump
-Design:Long life grease or oil bath lubrication. -Wetting part material:SUS304/SUS316/Dual-Phase steel. -Nominal Pressure:PN16. -Flange type:DIN/GB/JIS 10K/ANSI B16.5. -Temperature range:-20℃ to 180℃. -Certificate:ISO9001 certification, CE certification.
Vertical centrifugal pump Vertical centrifugal pump
more
FYH- vertical submersible centrifugal pump
-Design:Semi-open impeller with small footprint -Nominal Pressure:PN16 -Material:FRPP/PVDF/SUS304/SUS316 -Shaft:FRPP/PVDF/SUS304/SUS316 -Flange connection:DN Standard design/ANSI B16.5 Class 150 -Temperature Range:-20°C to +150°C  -Advantages: self-priming liquid delivery, no mechanical seal, no leakage
Small hydrochloric acid magnetic pump Small hydrochloric acid magnetic pump
more
MP- full plastic miniature magnetic pump
-Magnetic drive,fully sealed design,completely leak-free -Used for the transportation of all kinds of fine chemical acid and lye -Using the latest rare earth permanent magnet for higher efficiency -High efficiency motor with lower energy consumption
Hydrochloric acid self-priming pump Hydrochloric acid self-priming pump
more
ZMD-teflon lined self-priming magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF/ETFE -Shaft:Silicon carbide -Housing Material:Cast iron/HT200 -Flange connection:DIN/JIS 10K/GB/ANSI Class150 -Temperature Range:- 20 °C to + 150 °C
Chemical process pump Chemical process pump
more
KJB- plastic chemical process centrifugal pump
-Dimensions comply with DIN EN 22858 (ISO 2858)  -Parts in contact with the medium made of solid plastic  -Optional particle-resistant and wear-resistant sealing system -Open, axially adjustable impeller with back vanes  -Flow: 1- 1000m3/h  -Head: 1.5-80m 
magnetic centrifugal pump for hydrochloride magnetic centrifugal pump for hydrochloride
more
MPH- full plastic magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN10 -Wetting parts:Reinforced polypropylene/PVDF -Shaft:Silicon carbide/Ceramic -Housing Material:Reinforced polypropylene/PVDF -Installation mode:Flange / Threaded hose -Temperature Range:0 °C to + 60 °C
teco pump teco pump
more
TS- TECO horizontal centrifugal pump
Preferential price, long service life -Flow (Q): 4.8-380m3/h -Head (H): 10-40m -Work pressure (P): 1.6MPa -Operating temperature (t):0℃-120℃
chemical process pump manufacturers chemical process pump manufacturers
more
CZ-standard chemical process pump
Size and performance meet the DIN24256/ISO2858 standard -Flow (Q): 3.2-2000m3/h. -Head (H): 7-160m. -Work pressure (P): 2.5MPa. -Operating temperature (t):-80℃-300℃
screw pump screw pump
more
G Type-horizontal screw pump
-Compact structure and high efficiency. -Design:Archimedes screw pump, optional packing and mechanical seal. -Material: Cast iron / SUS304/SUS316L -Nominal Pressure:0.3Mpa-1.2Mpa -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:0℃ to 150℃. -Features: Could transport liquid with high viscosity and containing particles.  
Self-priming pump Self-priming pump
more
ZX- self-priming centrifugal pump
-Compact structure, easy to operate, strong self-priming ability. -Design:Single stage single suction, matching mechanical seal. -Material: cast iron / SUS304/SUS316L -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 120℃. -Features: self-priming without installing bottom valve.  
Mortar pump Mortar pump
more
UHB-ZK- Chemical mortar pump
-Suitable for the transportation of corrosive liquids containing impurities and particles. -Design:Mechanical seal built-in external flushing system. -Lining:Ultra high molecular weight polyethylene (UHMWPE) . -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 80℃. -Features: semi-open impeller, wide flow channel.  
slurry pump manufacturers slurry pump manufacturers
more
ZJ- heavy duty slurry pump
-Used to transport corrosive slurry containing solid particles. -Design:Single stage single suction horizontal centrifugal pump. -Casing:Metal shell. -Lining:Wear-resistant metal / rubber. -Impeller form:Closed type / open type. -Driving mode:Motor directly connected/Belt drive. -Temperature range:0℃ to 100℃. -Sealing form:Packing seal.    
Sulfuric acid pump Sulfuric acid pump
more
FSB- full plastic horizontal centrifugal pump
-Design:Long life grease or oil bath lubrication,8-10mm full plastic layer -Pump body:PTFE,PFA,FEP,PE-UHMW-PP alloy -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150, Movable flange -Temperature range:-20℃ to 90℃ -Certificate:ISO9001 certification, CE certification
Sludge centrifugal pump Sludge centrifugal pump
more
CVD/CHD dry pit non-clog pump
APPLICATION -Wastewater treatment plant sewage and sludge pumping equipment -Municpial and industrial wastewater pumping equipment
magnetic vortex pump magnetic vortex pump
more
MDW- stainless steel magnetic vortex pump
MDW-magnetic drive type high-low temperature vortex pump, the material of overcurrent parts is stainless steel. -Adopts advanced design principles and manufacturing technology. -The dynamic seal change to a static seal through the Magnetic conduction between the isolation cover and magnet. -which make sure the stable performance under high-low temperature condition.
pump for caustic soda pump for caustic soda
more
IH stainless steel caustic pump
-Design:Special pump for caustic soda, corrosion resistant mechanical seal. -Wetting part material:SUS304/SUS316/Dual-Phase steel. -Nominal Pressure:PN16. -Flange type:DIN/GB/JIS 10K/ANSI B16.5. -Temperature range:-20℃ to 180℃. -Certificate:ISO9001 certification, CE certification.
sulphuric acid pumps sulphuric acid pumps
more
CQB-F magnetically driven sulphuric acid pump
-Applicable liquid:Can transport any concentration of impurity-free sulfuric acid. -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
chlorine pumps chlorine pumps
more
CQB-F magnetic drive chlorine pump
-Applicable liquid:Clean chlorine can be transported at any temperature. -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
pump for caustic soda pump for caustic soda
more
IH stainless steel sodium hydroxide pump
-Design:Special pump for sodium hydroxide, corrosion resistant mechanical seal. -Wetting part material:SUS304/SUS316/Dual-Phase steel. -Nominal Pressure:PN16. -Flange type:DIN/GB/JIS 10K/ANSI B16.5. -Temperature range:-20℃ to 180℃. -Certificate:ISO9001 certification, CE certification.
brine pump brine pump
more
IHF- single stage centrifugal brine pump
-Transport clean salt water of any concentration. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
Acid pump Acid pump
more
IHF- single stage centrifugal acid pump
-Transport acidic liquids of any concentration without solid impurities. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
hydrochloric acid pump hydrochloric acid pump
more
CQB-F magnetic drive hydrochloric pump
-Applicable liquid:Can transport hydrochloric acid liquid of any concentration and does not contain solid impurities. -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
Sodium hydroxide pump Sodium hydroxide pump
more
CQB-S- stainless steel organic solvent magnetic pump
Suitable for the transportation of all kinds of flammable and explosive solvents (benzene, alcohol, phenols, Bing, ethers, alkanes) -Design:Sealed non-leakage design -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange -Temperature range:-20℃ to 240℃ -Certificate:ISO9001 certification, CE certification
Na3PO4 pumps Na3PO4 pumps
more
CQB-F sodium phosphate magnetic pump
-Applicable liquid:Can transport any concentration of impurity-free sodium phosphate. -Design:Magnetic coupling, no shaft seal, no leakage.(FFKM O-ring) -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
Nitric acid pump Nitric acid pump
more
IHF- nitric acid centrifugal pump
-Can transport nitric acid liquid of any concentration without particles. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
HF pumps HF pumps
more
CQB-F hydrofluoric acid magnetic pump
-Applicable liquid:Can transport any concentration of impurity-free hydrofluoric acid. -Design:Magnetic coupling, no shaft seal, no leakage.(FFKM O-ring/SSIC shaft) -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
Sodium hypochlorite pump Sodium hypochlorite pump
more
IHF- sodium hypochlorite transfer pump
-Can transport sodium hypochlorite liquid of any concentration without particles. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
H3PO4 pumps H3PO4 pumps
more
CQB-F phosphoric acid magnetic pump
-Applicable liquid:Can transport any concentration of impurity-free phosphoric acid. -Design:Magnetic coupling, no shaft seal, no leakage.(Viton O-ring/Silicon carbide shaft) -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C 
H2O2 pump H2O2 pump
more
IHF- Hydrogen peroxide transfer pump
-Transport clean hydrogen peroxide liquid of any concentration (H2O2). -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16-RF. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.    
CH3OH pump CH3OH pump
more
CQB-S stainless steel methanol transfer magnetic pump
Suitable for the transportation of all kinds of flammable and explosive solvents (benzene, alcohol, phenols, Bing, ethers, alkanes). -Design:Sealed non-leakage design,ATEX certification of explosion-proof motor. -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange. -Temperature range:-20℃ to 300℃ -Certificate:ISO9001 certification, CE certification.
C2H6O pump C2H6O pump
more
CQB-S stainless steel alcohol transfer magnetic pump
Suitable for the transportation of all kinds of flammable and explosive solvents (benzene, alcohol, phenols, Bing, ethers, alkanes). -Design:Sealed non-leakage design,ATEX certification of explosion-proof motor. -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange. -Temperature range:-20℃ to 300℃ -Certificate:ISO9001 certification, CE certification.
Phosphoric acid pump Phosphoric acid pump
more
KJB- phosphate non-metal centrifugal pump
-Dimensions comply with DIN EN 22858 (ISO 2858)  -Parts in contact with the medium made of solid plastic(UHMW-PE) -Optional particle-resistant and wear-resistant sealing system(PLAN54 flushing water system-Double seal) -Open, axially adjustable impeller with back vanes(Semi open) -Flow: 1- 1000m3/h  -Head: 1.5-80m 

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

Skype

WhatsApp