OEM Magnetic Pump,Nitric Acid Transfer Pump,Methanol Pump Manufacturer

pumps

Professional solution of corrosion-resistant chemical pump

CQB-F Teflon Lining Magnetic Pump
-Applicable liquid:An acidic alkaline liquid with no impurities and strong corrosiveness -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C
view detail
IHF- mechanically sealed chemical centrifugal pump
-It is suitable for the transportation of corrosive liquids in various complex environments. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.
view detail
CQB-S Stainless steel magnetic drive pump
Suitable for all kinds of organic solvents transport, never demagnetization -Design:Sealed non-leakage design -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange -Temperature range:-20℃ to 240℃ -Certificate:ISO9001 certification, CE certification
view detail
IH stainless steel horizontal centrifugal pump
-Design:Long life grease or oil bath lubrication. -Wetting part material:SUS304/SUS316/Dual-Phase steel. -Nominal Pressure:PN16. -Flange type:DIN/GB/JIS 10K/ANSI B16.5. -Temperature range:-20℃ to 180℃. -Certificate:ISO9001 certification, CE certification.
view detail
FYH- vertical submersible centrifugal pump
-Design:Semi-open impeller with small footprint -Nominal Pressure:PN16 -Material:FRPP/PVDF/SUS304/SUS316 -Shaft:FRPP/PVDF/SUS304/SUS316 -Flange connection:DN Standard design/ANSI B16.5 Class 150 -Temperature Range:-20°C to +150°C -Advantages: self-priming liquid delivery, no mechanical seal, no leakage
view detail
MP- full plastic miniature magnetic pump
-Magnetic drive,fully sealed design,completely leak-free -Used for the transportation of all kinds of fine chemical acid and lye -Using the latest rare earth permanent magnet for higher efficiency -High efficiency motor with lower energy consumption
view detail
ZMD-teflon lined self-priming magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF/ETFE -Shaft:Silicon carbide -Housing Material:Cast iron/HT200 -Flange connection:DIN/JIS 10K/GB/ANSI Class150 -Temperature Range:- 20 °C to + 150 °C
view detail
KJB- plastic chemical process centrifugal pump
-Dimensions comply with DIN EN 22858 (ISO 2858) -Parts in contact with the medium made of solid plastic -Optional particle-resistant and wear-resistant sealing system -Open, axially adjustable impeller with back vanes -Flow: 1- 1000m3/h -Head: 1.5-80m
view detail
MPH- full plastic magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN10 -Wetting parts:Reinforced polypropylene/PVDF -Shaft:Silicon carbide/Ceramic -Housing Material:Reinforced polypropylene/PVDF -Installation mode:Flange / Threaded hose -Temperature Range:0 °C to + 60 °C
- Acetic acid pump
- magnetic pump supplier
- pumps for hydrochloric acid
- acetone pump
- alcohol pump
view detail
TS- TECO horizontal centrifugal pump
Preferential price, long service life -Flow (Q): 4.8-380m3/h -Head (H): 10-40m -Work pressure (P): 1.6MPa -Operating temperature (t):0℃-120℃
view detail
CZ-standard chemical process pump
Size and performance meet the DIN24256/ISO2858 standard -Flow (Q): 3.2-2000m3/h. -Head (H): 7-160m. -Work pressure (P): 2.5MPa. -Operating temperature (t):-80℃-300℃
- chemical pump
- Desulphurization pump
- Sugar pump
- Pulp pump
- transfer pump
- petroleum pump
view detail
G Type-horizontal screw pump
-Compact structure and high efficiency. -Design:Archimedes screw pump, optional packing and mechanical seal. -Material: Cast iron / SUS304/SUS316L -Nominal Pressure:0.3Mpa-1.2Mpa -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:0℃ to 150℃. -Features: Could transport liquid with high viscosity and containing particles.
view detail
ZX- self-priming centrifugal pump
-Compact structure, easy to operate, strong self-priming ability. -Design:Single stage single suction, matching mechanical seal. -Material: cast iron / SUS304/SUS316L -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 120℃. -Features: self-priming without installing bottom valve.
view detail
UHB-ZK- Chemical mortar pump
-Suitable for the transportation of corrosive liquids containing impurities and particles. -Design:Mechanical seal built-in external flushing system. -Lining:Ultra high molecular weight polyethylene (UHMWPE) . -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 80℃. -Features: semi-open impeller, wide flow channel.
view detail
ZJ- heavy duty slurry pump
-Used to transport corrosive slurry containing solid particles. -Design:Single stage single suction horizontal centrifugal pump. -Casing:Metal shell. -Lining:Wear-resistant metal / rubber. -Impeller form:Closed type / open type. -Driving mode:Motor directly connected/Belt drive. -Temperature range:0℃ to 100℃. -Sealing form:Packing seal.
view detail

CQB-F Teflon Lining Magnetic Pump
-Applicable liquid:An acidic alkaline liquid with no impurities and strong corrosiveness -Design:Magnetic coupling, no shaft seal, no leakage. -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF -Casing Material:Cast iron/Stainless steel/Cast steel -Flange connection:DIN/ANSI B16.5 Class 150/JIS 10K/DN -Temperature Range:-20°C to +150°C

detail
IHF- mechanically sealed chemical centrifugal pump
-It is suitable for the transportation of corrosive liquids in various complex environments. -Design:Long life grease or oil bath lubrication. -Casing:Cast iron/Stainless steel. -Lining:PTFE,PFA,FEP,PE-UHMW. -Nominal Pressure:PN16. -Flange:DIN or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 150℃. -Certificate:ISO9001 certification, CE certification.

detail
CQB-S Stainless steel magnetic drive pump
Suitable for all kinds of organic solvents transport, never demagnetization -Design:Sealed non-leakage design -Wetting material:SUS316L,SUS304,SS2205 -Nominal Pressure:PN16 -Flange:DN standard or ASME B16.5 class 150/JIS 10K, convex flange -Temperature range:-20℃ to 240℃ -Certificate:ISO9001 certification, CE certification

detail
IH stainless steel horizontal centrifugal pump
-Design:Long life grease or oil bath lubrication. -Wetting part material:SUS304/SUS316/Dual-Phase steel. -Nominal Pressure:PN16. -Flange type:DIN/GB/JIS 10K/ANSI B16.5. -Temperature range:-20℃ to 180℃. -Certificate:ISO9001 certification, CE certification.

detail
FYH- vertical submersible centrifugal pump
-Design:Semi-open impeller with small footprint -Nominal Pressure:PN16 -Material:FRPP/PVDF/SUS304/SUS316 -Shaft:FRPP/PVDF/SUS304/SUS316 -Flange connection:DN Standard design/ANSI B16.5 Class 150 -Temperature Range:-20°C to +150°C -Advantages: self-priming liquid delivery, no mechanical seal, no leakage

detail
MP- full plastic miniature magnetic pump
-Magnetic drive,fully sealed design,completely leak-free -Used for the transportation of all kinds of fine chemical acid and lye -Using the latest rare earth permanent magnet for higher efficiency -High efficiency motor with lower energy consumption

detail
ZMD-teflon lined self-priming magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN16 -Lining:FEP/PTFE/PFA/PVDF/ETFE -Shaft:Silicon carbide -Housing Material:Cast iron/HT200 -Flange connection:DIN/JIS 10K/GB/ANSI Class150 -Temperature Range:- 20 °C to + 150 °C

detail
KJB- plastic chemical process centrifugal pump
-Dimensions comply with DIN EN 22858 (ISO 2858) -Parts in contact with the medium made of solid plastic -Optional particle-resistant and wear-resistant sealing system -Open, axially adjustable impeller with back vanes -Flow: 1- 1000m3/h -Head: 1.5-80m

detail
MPH- full plastic magnetic pump
-Design: direct magnetic connection -Nominal Pressure:PN10 -Wetting parts:Reinforced polypropylene/PVDF -Shaft:Silicon carbide/Ceramic -Housing Material:Reinforced polypropylene/PVDF -Installation mode:Flange / Threaded hose -Temperature Range:0 °C to + 60 °C

detail
TS- TECO horizontal centrifugal pump
Preferential price, long service life -Flow (Q): 4.8-380m3/h -Head (H): 10-40m -Work pressure (P): 1.6MPa -Operating temperature (t):0℃-120℃

detail
CZ-standard chemical process pump
Size and performance meet the DIN24256/ISO2858 standard -Flow (Q): 3.2-2000m3/h. -Head (H): 7-160m. -Work pressure (P): 2.5MPa. -Operating temperature (t):-80℃-300℃

detail
G Type-horizontal screw pump
-Compact structure and high efficiency. -Design:Archimedes screw pump, optional packing and mechanical seal. -Material: Cast iron / SUS304/SUS316L -Nominal Pressure:0.3Mpa-1.2Mpa -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:0℃ to 150℃. -Features: Could transport liquid with high viscosity and containing particles.

detail
ZX- self-priming centrifugal pump
-Compact structure, easy to operate, strong self-priming ability. -Design:Single stage single suction, matching mechanical seal. -Material: cast iron / SUS304/SUS316L -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 120℃. -Features: self-priming without installing bottom valve.

detail
UHB-ZK- Chemical mortar pump
-Suitable for the transportation of corrosive liquids containing impurities and particles. -Design:Mechanical seal built-in external flushing system. -Lining:Ultra high molecular weight polyethylene (UHMWPE) . -Nominal Pressure:PN16. -Flange:DN standard or ASME B16.5 class 150, convex flange. -Temperature range:-20℃ to 80℃. -Features: semi-open impeller, wide flow channel.

detail
ZJ- heavy duty slurry pump
-Used to transport corrosive slurry containing solid particles. -Design:Single stage single suction horizontal centrifugal pump. -Casing:Metal shell. -Lining:Wear-resistant metal / rubber. -Impeller form:Closed type / open type. -Driving mode:Motor directly connected/Belt drive. -Temperature range:0℃ to 100℃. -Sealing form:Packing seal.

detail

1 2 3

A total of3pages

Categories

how can we help you

You can contact us any way that is convenient for you. We are available 24/7 via email or telephone.

Contact Us

new products

Xuancheng rister pump and Valve Technology Co.,Ltd

Xuancheng rister pump and Valve Technology Co.,Ltd

Tel : +86 15256328921
Email : info@rister-cn.com
Skype : +86 15256328921
Whatsapp : +8615256328921
Office Add:No.28 Shenjia Road, Taimei Group, Xuancheng City, Anhui Province, China
Factory Add:Wan Neng West Road, West Development Zone, Jing Xian, Xuancheng City, Anhui Province, China

Need Help

Hot Tags

Scan it(WhatsApp)

We are online 7*24 hours to answer all your questions.

Whatsapp

Follow Us :

Subscribe To Our Newsletter :

Submit

© 2023 Xuancheng rister pump and Valve Technology Co.,Ltd All Rights Reserved. |

IPv6 network supported

Blog Sitemap Xml Privacy Policy

leave a message

leave a message

Home

Products

Skype

WhatsApp