The IH single-stage single-suction cantilever chemical centrifugal pump has the characteristics of wide performance range, high efficiency, high design level and convenient maintenance, and its efficiency is 5% higher than that of the ordinary pump. it is determined by the Ministry of Machinery Industry to replace the old corrosion-resistant centrifugal pump for energy saving and upgrading. For conveying liquids without solid particles that are corrosive and have a viscosity similar to water. The conveying medium temperature of IH stainless steel chemical pump is-20 ℃ ~ 105 ℃. The double face seal cooling device is used when needed, and the transportable medium temperature is 20 ℃ ~ + 280 ℃. Suitable for chemical, petroleum, metallurgy, electric power, paper, food, pharmaceutical, environmental protection, wastewater treatment and synthetic fiber and other industries to transport all kinds of corrosive or non-polluting water-like media.

The structural characteristics of chemical pump:
-The pump cover is fixed on the middle bracket through the stop, and then clamped in the middle through the connection between the pump body and the middle bracket stop. The pump body is axial suction, radial discharge, foot support type, which can be directly fixed on the base. The suspension part is fixed on the middle bracket through the stop, and is supported on the base with the suspension bracket. In order to facilitate the disassembly, an extended coupling is designed, which can not disassemble the inlet and outlet connection pipeline, pump body and motor during maintenance. Only need to remove the middle coupling of the coupling, you can exit the rotor parts for maintenance.

The rotation direction of the chemical pump:
-The pump is directly driven by the motor through the lengthened coupling and rotates clockwise from the motor end.