Introduction to the type and process of hydrochloric acid pump

I-Hydrochloric acid is used in different processes and the types of hydrochloric acid pumps are also different. the following are the four processes of hydrochloric acid pumps:

1. The self-priming pump of hydrochloric acid is used in the transportation and lifting process.

2. the ones used in the unloading process are hydrochloric acid magnetic pump and hydrochloric acid self-priming pump.

3. The quantitative dosing pump of hydrochloric acid is used in the accurate dosing process.

4. If hydrochloric acid contains a small amount of impurities, the use is: hydrochloric acid pneumatic diaphragm pump.

II-select the corresponding hydrochloric acid pump according to the process:

In the process of loading and unloading hydrochloric acid: hydrochloric acid self-priming pump and hydrochloric acid magnetic pump are used.

Because of its strong self-priming ability, the self-priming pump can complete the step of transporting hydrochloric acid to the tanker.

The magnetic pump is suitable for conveying valuable and corrosive liquids such as hydrochloric acid because of its non-leakage characteristics.

III-select the material of the hydrochloric acid pump according to the medium: select the hydrochloric acid pump material according to the hydrochloric acid concentration, select the hydrochloric acid pump type according to the hydrochloric acid process, and select the hydrochloric acid pump type according to the flow head. Hydrochloric acid is divided into dilute hydrochloric acid and concentrated hydrochloric acid, general dilute hydrochloric acid I can choose the plastic pump of PRPP material, if it is concentrated hydrochloric acid, I need to choose the plastic pump of PVDF material.

IV-choose the hydrochloric acid pump according to the different installation mode: the choice of these two types of hydrochloric acid pump lies in the installation mode, if the pump is installed at the bottom of the tanker, in this case there is no need for self-priming capacity, you can choose the magnetic pump. If it is installed on the top of the tanker, at this time the lift is higher, it is necessary to use self-priming pump, which is the choice of hydrochloric acid pump type.