How to clean the acid and alkali resistant magnetic pump?

When transporting some media which are easy to crystallize and precipitate, the acid and alkali resistant magnetic pump needs to clean the equipment in time after transportation. the correct cleaning method can ensure the quality of cleaning and reduce the cost of cleaning. so how to clean the equipment? It is necessary to master the correct cleaning method.

1. When cleaning the acid-and alkali-resistant magnetic pump, it includes cleaning the outer surface of the equipment, as well as cleaning some parts. Because people clean the parts for different purposes, cleaning the parts also includes pre-installation cleaning, as well as cleaning of the plated cover and bonded parts.

2. When cleaning the acid-and alkali-resistant magnetic pump, the scale and rust of the equipment impellers and bearings should be cleaned, the rust and scale should be scraped off, and then cleaned with water, and then cleaned with compressed air. Some oil dirt or rust may be accumulated at the joint of the pump shell, and the water seal pipe should also be cleaned to ensure the smooth flow of the water seal pipe and the position of the bearing bush and bearing. clean the oil scale above, then clean the oil ring and oil level meter, clean the ball bearing with gasoline, and apply a layer of protective oil after cleaning some parts that do not need to be installed.

When the acid and alkali resistant magnetic pump is in use, it must be cleaned frequently to ensure that the equipment can run well and have a long service life. When cleaning, different cleaning agents should be used for different parts. Different cleaning methods should also be adopted to make the cleaning quality higher.